cannabis products – Frasier's Health Concepts

All About Cannabutter

If you’re someone who wants to try cooking with cannabis products, one way to do so is with cannabutter. This s one of the best ways to create a smoke-free alternative that is long-lasting and also is one of the best ways to medicate.

For those curious about this, you’re not alone. Learn how you can make edibles right now, even if you’re a beginner.

How to Do So

Creating cannabutter is definitely an experience, and for those interested in cooking with cannabis, preparation is the first step.

The psychoactive elements of cannabis do need fat to dissolve correctly, so you need to incorporate it in oils, butter, and milk. Don’t use water since it can’t dissolve.

When you get it from the dispensary, you want to make sure that you know what you’re using too, since there are different terpenes that are in this, and that affects not just how the weed reacts, but also the tastes, and even how they interact with other substances too.

Cannabis doesn’t just have THC and CBD, but other elements too. The best thing to do is to make sure that you have the right THC content for what you’re getting. You want to calculate how much THC is in the flower, and then multiply it by .877, which is the total amount of THC in a gram of it. This will help you figure out the full amount of THC in a batch of this, and also the dosage within each edible, when you take the total THC divided by the number of edibles created.

The dosage

Inexperienced users will not have as much tolerance to this, so you should try to keep it at around 2 mg of this for the first dosage. Longer users may possibly want more than 10 mg, but of course, you want to make sure that you have the right dosage depending on your goals. Your bodyweight and size are a major factor in this, as it will take a lot more THC to get a taller or larger person high. You should also look at the strain too to see whether or not it’s more powerful when it’s smoked, or when eaten.

Decarb the Cannabis

You want to make sure that when you cook with cannabis you always decarb it first. This is because it’s the only way to get cannabis to well, do what it needs to do.

Decarbing is basically removing the carboxyl from this, and this releases the carbon dioxide, which basically makes the THC and CBD work. The way to do this is to preheat your oven, grind the flower so that it’s small enough that it works, and then spread this, and bake it for up to 90 minutes in most cases. Youwnat to make sure that you do slowly heat up the flower before you do it, and not too high at once.

60 minutes are good if you want higher THC, with 90 minutes being what offers more CBD to this. You do have to do this because it is the only way to get the chemicals out.

Afterwards, you basically melt a cup of butter, a cup of oil, adding the ground cannabis, and then let it sit on low heat for abut three hours. You then want to strain it with a cheesecloth or a colander in some cases. That way, it gets the chunks out.

Then you can cook with this. Cannabutter is simple to make, but if you’re not used to working with it, it can be a bit complex for those just starting out.

The New FDA Guidelines for CBD medications

The FDA recently put out a new draft for CBD medications speeding up the approval to use generic CBD medications for this. This can change the way that CBD is used medicinally, potentially paving the path for cannabis usage and growth to treat various medical conditions.

The new qualifications

This is something that determines the medication and then equivalent within the marketplace. This is now allowing CBD users and companies to get a waiver from the FDA, provided they meet the requirements for this as well.

The qualifications are as follows:

The generic types of the CBD solutions need to have the same type of concentration and the dosage of the product that’s considered the reference listed drug.
It also should not have any major formula changes or different active ingredients that change the bioavailability of the product.
The CBD medications need less than .1% THC in them
They also must have the botanical raw material listed from the species, and also be able to look at the correct type of species and how it’s identified
Due to the variety of different cultivars that are out there, they now need to properly authenticate each cultivator, and that’ll be used as the BRM basis that’s out there.
They need to follow then proper guidelines of the Good Agricultural and Collection Practices, ensuring that there are very little variations to this, offering some consistency from one specific batch of drugs to the next.
This is something that’s been put out, so that the people can get these generic varieties of drugs faster than waiting for it to be approved.

New Means to Study CBD

Probably the biggest thing about this isn’t the new requirements but instead the new approval from the FDA to study CBD in order to find out more about the cannabinoid, and also how it can help others. People.

They would look at the different concentrations, and also what was on the label that was listed.

This actually solicited new companies in order to help study the CBD that’s there, and some of the other cannabinoids that are there. They would collect and look at some of the samples, to find out the quality and also some of the other types of health products that come with this.

This includes all manner of CBD product such as oil, tinctures, baked goods, and even candy and water for those to better understand this They would look at the samples that are provided there, and they would look to make sure that the CBD within all of this is fresh enough. They work to ensure that the bacteria, such as salmonella and the like aren’t’ there, and they get the proper analysis that’s there.

This goal is to properly address the guidelines in order to help with better understanding of CBD, and also of the different other products that come around with this.

This is something that’s still being looked at today, and there are tons of people who are looking to get the full benefit of CBD and the other products that are there.

What does this mean for the future of this cannabinoid a lot actually. A ton of people can now use CBD for a variety of applications, and it’s less that it’s a bad product, but instead, one that definitely offers newfound potential for those who need it.

We hope that with those FDA requirements and some of the other new additions we not only see the beginning of a new and fun means to get CBD for different uses, but also a possible road for proper cannabis usage, and educating others on THC products too.

Cannabis Concentrates

In the late 90s, something that came forward was cannabis concentrates. They’re potent, and a huge step in the right direction for cannabis users. If you’re looking to possibly consume cannabis more, this could be great. What’s the best concentrate for you to try? Let’s go over each of them, and the benefits and drawbacks of each of these, so you know what you’re going to take.

The difference

When you compare this to flowers, concentrates are going to be much more powerful. Most flowers hit around the 20-30% range in terms of potency and content. But by a comparison, concentrates are almost five times that. A little bit goes a long way, and concentration can last a long time, especially if you want something intense.

They’re very easy to use, and stable to put on shelves, and they offer a ton of benefits. Some people have them through dab rigs, a type of pipe, but others might use oils since that doesn’t require you to buy equipment to use them.

Solvent or Solventless

Solvents are something that’s used to extract the different cannabinoids and terpenes directly from where the flower is. Some people like solventless types, like rosin or hash, as they’re usually better. Some that are created with solvents offer the best flavor and also the best potency.

However, some of the solvents that are used include butane ethanol, or even carbon dioxide. While they do get removed during the extraction process, this can be dangerous if it’s not.

You should always look at the preference you have and if the brands that you have are trustworthy before you decide to purchase these types of compounds.

The types

Here are the most common types that are out there.

First is kief. It’s not technically a full-on concentrate, but it’s basically a product that comes from separating the trichomes from where the cannabis is. The powder is light colored, fine, and you can put this on top of the flower to make it stronger, add this to joints, bowls, and also pipes too.

Then there is hash, or hashish, which is basically dense and sticky kief blocks. This is still used a bit, because it’s potent, and it has a ton of flavor too.

Then there is rosin, which is made through adding heat, pressure, and the like to a flower that’s cured. This is usually the safest and most popular, as this usually doesn’t require equipment in order to make this.

Then there is BHO, or butane hash oil, which is the first concentrate that’s been added for modern usage. The terpenes and the cannabinoids within this are what make it popular. It’s basically made into shatter, which is a fancy name for the candylike types of shards that are dried and are used directly from a rig.

Then there is live resin. This is one that’s made directly from flowers that gets flash frozen. This does have a lot of terpenes, and it feels almost hyper realistic compared to some of the other ways.

These are but a few of the different concentrates, but all of these are great for beginners to start out with. If you’re still not sure about using something, you can always go in, talk to a budtender, and if they have a recommendation, you can try it.

Just remember to keep in mind that with these kinds of products, t can be quite potent, and a lot of people do notice the difference when they take these so always start off with a little, and from there, see where you go with it, and make the decision from there.

Can Cannabis Treat Pain

One of the main reasons people use cannabis, is of course, to treat the pain that you have. it’s a drug that’s used for a lot of reasons, whether it’s for recreational, or other uses, and some have even managed to legalize this for even medical concerns too.

Pain is something that most people who use medical cannabis want to use for, and usually, those who use medical cannabis use it for this. Those who self-medicate for example, are more likely to use this for pain.

While cannabis is used for pain, you might wonder just how good and effective it is for this. In truth, new studies show that there is still a lot to learn about this, and we don’t really know everything about this.

One journal from the AMA even claims that it’s just a placebo, and it doesn’t really relieve the pain.

They looked at some controlled trials that were randomized, where the cannabis that was there got compared to a placebo that was used for treatment of clinical pain. They looked at the studies that compared the pain, and the intensity that was before the treatment, and after treatment, and it involved 290 studies that involved about 1500 different people.

These studies looked at various conditions of pain, including neuropathic pain, and even multiple sclerosis. They looked at the cannabis types too, whether it included CBD, THC, or the synthetic forms of cannabis that are used for prescription drugs.

They also looked at the means to administer them, whether it was via a pill, oil, a spray, or even smoked as well.

Most of the people who did this were those who were female, that were between 33 and 62 years old. This also was conducted in different places around the world.

Some analysis showed that the treatment of this actually was on the same level as the placebo, and they didn’t find major differences between the cannabis consumed, and the option of the placebo used for pain.

There was another meta-analysis that also found that there were better studies that offered blinding procedures that were better, where they looked at the researcher and the recipients that weren’t aware of the persona and the substance they were receiving. Through this, they found the placebo’s response was higher. This also shows that some cannabis trials that were controlled by the placebo aren’t correct with eh blinding, and there might be a bit of overestimation in terms of how good medical cannabis could be.

Another study looked at cannabis and the placebo, and while they had the same appearance, odor, and even the taste, they weren’t able to actually choose one or the other. The researchers made sure that they made it clear when they were getting the substance, and not to show what both of these were to make sure the study was accurate.

There is also new media coverage, and in fact, it was discovered that the coverage of media usually leads to a more positive response, rather than what the research says it’s true.

There are still other studies that look into the placebo response, and how it compares to the cannabis that’s consumed.

While there is still more work to be done, and people blame the coverage from the media of the response of the placebo being high, it was found that the placebo offered was just as effective as the cannabis that they consumed for pain, but it also showed the importance as well of the effects of the placebo and external influences too.